Ontvang nu dagelijks onze kooptips!
word abonnee
sluiten ✕
Terug naar discussie overzicht
Nieuws en info hier plaatsen (deel 4)
Volgen
AISI update on Raw Steel Production in US in Week 02 In the week ending on January 12, 2019, domestic raw steel production was 1,891,000 net tons while the capability utilization rate was 79.8 percent. Production was 1,715,000 net tons in the week ending January 12, 2018 while the capability utilization then was 73.6 percent. The current week production represents a 10.3 percent increase from the same period in the previous year. Production for the week ending January 12, 2019 is up 0.8 percent from the previous week ending January 5, 2019 when production was 1,876,000 net tons and the rate of capability utilization was 80.0 percent. Adjusted year-to-date production through January 12, 2019 was 3,231,000 net tons, at a capability utilization rate of 79.5 percent. That is up 9.9 percent from the 2,940,000 net tons during the same period last year, when the capability utilization rate was 73.6 percent. Broken down by districts, here's production for the week ending January 12, 2019 in thousands of net tons: North East: 223; Great Lakes: 731; Midwest: 206; Southern: 654 and Western: 77 for a total of 1891. Source : Strategic Research Institute
European Commission restarts Tata-Thyssenkrupp steel merger probe, sets new deadline of Apr 29 SP Global reported that the European Commission said that it had restarted its investigation into the proposed merger of Tata and ThyssenKrupp's steel operations following a suspension of the case in December, setting a new deadline of April 29. EC confirmed to S&P Global Platts that the suspension of the investigation ended last week, with the new April deadline set The commission paused the case in December to waited for required documents and information which the companies failed to submit in September when they notified the EC about the merger. The initial deadline was March 19, but had already been extended once following concerns regarding primarily flat carbon steel for automotive applications, metallic coated steel for packaging, and grain-oriented electrical steel. Source : SP Global
EU steel export quotas would be tough blow to Serbia - Mr Vucic Tanjug reported that Serbian President Mr Aleksandar Vucic once again asked the EU to assist Serbia when it makes a decision on steel export quotas on Wednesday, which he said was hugely significant for the country. Mr Vucic, after a meeting with EU ambassadors, said "I would like to ask EU Trade Commissioner Cecilia Maelstrom, with whom the PM will meet today, as well as European Commission President Jean-Claude Juncker and everyone else, to assist Serbia.” He expressed the hope that, in line with a far-stretched wording in the Stabilisation and Association Agreement, Serbia could join the likes of Norway, Iceland and Lichtenstein. Source : Tanjug
MMK takes part in recovery effort following building collapse in Magnitogorsk On the night of 31 December 2018, part of a ten-storey apartment building in Magnitogorsk collapsed following a gas explosion. The explosion and subsequent collapse claimed the lives of 39 people. Employees of Magnitogorsk Iron and Steel Works and the MMK Group were involved from the beginning of the rescue effort. MMK deployed special equipment at the scene of the accident, while employees helped the fire and search-and-rescue services to help clear the rubble and rescue survivors. Among those involved were gas rescuers and technicians, drivers and mechanics, machinists and electricians, and many more. Their work has earned high praise. The First Deputy Minister of Emergency Situations, Mr Alexander Chupriyan, sincerely thanked the city’s residents and volunteers for supporting the rescuers. The round-the-clock work was supported by a field kitchen and heated areas. Thanking everyone who took part in this search and rescue operation, Alexander Chupriyan singled out the regional and city authorities, MMK, workers of all the rescue services involved, volunteers and all concerned people of Magnitogorsk: “I have not heard from these people a single complaint or discontent. Nobody talked about personal time. They were with us for days and nights. They even delivered tea to us. Thank you very much. Such a united, genuine team.” The Governor of Chelyabinsk Region Boris Dubrovsky and city head Sergey Berdnikov expressed gratitude to the management and employees of MMK for their help and support. MMK CEO Mr Pavel Shilyaev expressed the company’s gratitude to 118 employees who were most involved in the emergency response efforts for their timely and high-quality work. Source : Strategic Research Institute
Keep safeguards in place to protect Canada's steel industry - USW Ken Neumann, National Director of the United Steelworkers union (USW) said that, with no sign of US steel tariffs ending anytime soon, the federal government must continue safeguard measures on several categories of foreign steel imports, which surged throughout much of 2018. He said "Our members themselves are appearing this month before the Canadian International Trade Tribunal (CITT) to make the case for extending safeguard measures beyond the original 200-day period that began in October. The union's participation in CITT proceedings is critical for making a decision that takes into consideration impacts on workers and communities as well as companies. The need to extend the safeguards is compounded by the continuing unfair, US imposed, 25% tariffs on Canadian steel. The Liberal government has so far failed in its efforts to end this attack on Canadian jobs in a critical industry." Abnormal increases of foreign steel imports into Canada are the result of initial tariffs imposed by the US on much of the world last March, and prior to the start of tariffs on Canadian steel to the US in June. The CITT's mandate in the current inquiry is to determine whether imports of certain products are causing injury or threat of injury to domestic producers and warrant safeguard measures to stabilize the Canadian steel market in seven steel products. USW members from Algoma Steel Inc., Stelco, Ivaco, Tenaris, ArcelorMittal, Nova Tube, Evraz and AltaSteel are attending the CITT Ottawa hearings, which are scheduled to end on January 24. Source : Strategic Research Institute
Construction industry drives demand for steel in UAE and GCC region Demand for steel products across the UAE and the GCC region is set to continue to increase, driven by a strong pipeline of construction projects as the country prepares itself for the Expo 2020 Dubai event, experts at SteelFab 2019 said. The 15th edition of the event was inaugurated by Sheikh Khalid bin Abdullah Al Qasimi, Chairman of the Sharjah Ports and Customs Department, and brings together more than 300 companies that represent some of the world's leading manufacturers and suppliers. Exhibitors will showcase the latest innovations belonging to more than 1,000 brands that specialise in welding, cutting, grinding, pipe and tube machinery, and other technologies and solutions. Experts at the event will also highlight the latest innovative solutions that will solve the daily challenges faced by companies and factories, such as high-capacity systems for handling panels and rebar systems. According to the World Steel Association, global steel demand was set to increase 1.8 per cent year-on-year in 2018. The association has also estimated that demand will grow 0.7 per cent to 1.63 billion tonnes in 2019, compared to 2018. Experts said that steel production is fairly fragmented across the GCC, and that the UAE's demand for steel and steel products has made it one of the largest consumers in the GCC region. The region has continued to increase its investments in construction projects, mostly in preparations for mega events such as the World Expo 2020 in Dubai and the Fifa World Cup 2022 in Qatar. It is anticipated that steel consumption in the UAE will grow at a CAGR of eight per cent between 2016-20. Mr Abdullah Sultan Al Owais, chairman of Sharjah Chamber of Commerce and Industry, emphasised the importance of SteelFab as an annual forum for the global and regional metal working industry to discover the latest products and technologies. He also noted that the event is in line with the UAE's plans to raise the industry's contribution to its GDP from its current rate of 14 per cent to 20 per cent by 2021, especially since there are expectations that the demand for iron and steel products will continue to increase due to spending in the infrastructure sectors of the country. According to Fitch Solutions, the Mena construction industry is estimated to grow at an average rate of 7.5 per cent year-on-year basis in 2019 and will expand at an average rate of 6.8 per cent every year until 2022. Meanwhile, the UAE currently boasts a construction pipeline of 11,334 projects valued at USD 272.7 billion as of November-end 2018, according to construction intelligence platform BNC Network. Source : Khaleej Times
Nanjing upgrades EAF with injector technology from SMS Group Nanjing Iron and Steel Co Ltd, China, has placed an order with SMS group to supply new SMS group ConSo R6 injectors for the electric arc furnace No 3 in Luhe, Nanjing. Erection and commissioning of the equipment are scheduled for 2019. The main goal of the upgrade is to cope with the future reduction of hot metal by replacing it with scrap in the charge. For this purpose, efficient injector technology is required. Furthermore, the upgrade will reduce operating costs and increase productivity. The injector design was developed using computational fluid dynamics (CFD). The new lightweight construction, ten percent lighter than previous version, is particularly easy to maintain. The SMS group ConSo R6 water-cooled copper boxes in monoblock design are not susceptible to cracking and effectively prevent water leakage. The integrated flashback detection system allows continuous monitoring of the ConSo R6 injector. The injector, which can be operated in burner or oxygen injector mode, additionally provides for automatic management of the melting profiles, ensuring excellent efficiency. The SMS group scope of supply includes three ConSo R6 injectors, water-cooled copper boxes, the respective valve stations, an integrated flashback detection system as well as supervision of the erection and commissioning activities. Source : Strategic Research Institute
JSW Steel unlikely to bid for Uttam Value & Galva Metaliks - Report ET, citing three people aware of the development, reported that JSW Steel is unlikely to bid for Uttam Value Steels and Uttam Galva Metaliks as its chances of securing Bhushan Power and Steel get stronger. The report quoted a source as saying that “JSW Steel is not interested in the assets anymore.” JSW Steel had put in an expression of interest in October for the twin stressed assets that together owe INR 5,400 crore to lenders. However, ET had reported Monday that JSW Steel will not be facing competition from Tata Steel for its INR 19,700 crore offer for Bhushan Power and Steel withTata Steel unwilling to revise its bid. With its position cemented further it may not bid for the firms that would have added to its downstream capacities. Source : ET
Primo Water wins exemption from steel tariff Bizjournals reported that Winston-Salem-based Primo Water Corp has won an exemption from steel tariffs on Chinese imports, according to a report in the Winston-Salem Journal, the exemption is retroactive to July when the federal government enacted the 25 percent tariff. The exemption will remain in place for Primo through December. Primo is a a leading provider of multigallon purified bottled water, self-service refill water and water dispensers. Last year, it appealed to the Office of the US Trade Representative for an exemption because of the materials it uses for dispensers. The company reported that its gross margin for the dispensers segment decreased in the third quarter to 5.2 percent from 12.3 percent a year ago. The Journal said that during an investor presentation Monday, the company attributed the decline to the tariffs. The company said that "Primo believes the lower sales price (with the tariff exemption) can drive consumer demand of its water dispensers and generate future water households.” Source : Bizjournals
Ultra-thin hot rolled strip 0.6 millimeters produced on Primetals Technologies Arvedi ESP line at Rizhao In October 2018, an Arvedi ESP (Endless Strip Production) line installed in a plant belonging to the Chinese steel producer Rizhao Steel Group Co Ltd produced ultra-thin hot strip with a thickness of just 0.6 millimeters for the very first time. Hot strip as thin as this had never before been achieved anywhere in the world. This thin strip can cover more than 80 percent of regular commercial cold-rolled thicknesses. This widens Rizhao's range of products, especially for cold strip substitutes. After the line entered service in April, success was achieved just six months later. Following on from 10 years of continued development of the endless concept, this latest production record was achieved during a test in which eight coils were produced with strip thicknesses of less than 0.8 millimeters. This production sequence involved first progressively reducing the strip thickness to 0.75, 0.7 and finally 0.6 millimeters, before continuing the sequence with increasing thicknesses. ESP mills are guaranteed to produce strip thicknesses of 0.8 millimeters, which are used industrially and traded on the market for direct applications. Whereas a strip thickness of 0.8 millimeters covers around 50 percent of cold-rolled thicknesses, a strip thickness of 0.6 millimeters can cover more than 80 percent of cold-rolled thicknesses. Conventional hot strip production has a lower thickness limit of 1.8 millimeters, or 1.2 millimeters for special processes. This success was made possible by the familiar properties of the ESP process, such as an extremely high process stability accompanied by constant speeds and temperatures. At the same time, advances were made in technologies that, in their original form, had only been used in cold rolling mills for high-quality products, the process being controlled by "ultra-thin rolling technology" based on the control concepts applied in cold rolling technology. The Arvedi ESP system produces hot strip directly from liquid steel in a continuous, uninterrupted production process in a linked casting and rolling mill. Mills of this type have an energy consumption and associated costs up to 45 percent lower than those of conventional mills with separate casting and rolling processes. They also have substantially reduced CO2 emissions. Furthermore, the dimensions of these mills, with a length of only 155 meters, are considerably more compact than those of conventional casting and rolling mills. The casting and rolling line is controlled by standardized, integrated basic (level 1) and process (level 2) automation, which ensures finely coordinated interaction of the casting and rolling processes. Source : Strategic Research Institute
Chinese steel producers profits surge as capacity slashed Xinhua reported that Chinese steel producers saw their profits surge in the first 11 months of 2018 as the sector's overcapacity was slashed amid the supply-side structural reform. Data from the China Iron and Steel Association showed the combined profits of its members' enterprises jumped 63.54 percent year on year to 280.2 billion yuan (about 41.5 billion US dollars) in the first 11 months of 2018. Their debt ratio declined to 65.74 percent by the end of November, down 3.39 percentage points from a year earlier, with half of the enterprises seeing a debt ratio of below 60 percent. The improvement in corporate profitability came after the country fulfilled its goal of reducing the steel industry's capacity by 100 million-150 million tonnes from 2016 to 2020 ahead of schedule. By the end of 2017, steel overcapacity had already been slashed by over 115 million tonnes. Mr Yu Yong, CISA chairman, at a conference of the association said that "The market environment has improved markedly, and the bloated capacity has been effectively addressed.” However, he cautioned that the foundation for sustained profitability remains shaky as costs have increased while steel prices have started to retreat due to such factors as lower demand and growing output. Source : Xinhua
IFCI moves NCLAT against AION-JSW bid for Monnet Ispat Mint reported that IFCI Ltd, the erstwhile Industrial Finance Corp of India, has challenged the AION Capital-JSW Steel Ltd resolution plan for Monnet Ispat and Energy Ltd, which treats IFCI’s secured loan as unsecured debt, before the National Company Law Appellate Tribunal (NCLAT). The division bench of justices S.J. Mukhopadhaya and Bansi Lal Bhat in its ruling on 10 January “One of the grounds taken by the appellant is that the resolution plan discriminates between Monnet Ispat’s financial creditors and, thereby, is against the ratio laid down by this appellate tribunal in the Binani Industries Ltd vs Bank of Baroda case.” The NCLAT has directed the resolution applicants (AION-JSW) to either modify the financial matrix of the resolution plan or to argue on its legality at the next hearing. It will next hear the matter on 29 January. Monnet Ispat owes around INR 158 crore to IFCI. Last April, Monnet Ispat’s committee of creditors (CoC) had approved the resolution plan to revive the distressed steel manufacturer. Subsequently, the resolution professional (RP) had submitted the AION-JSW resolution plan to the National Company Law Tribunal (NCLT) for approval. In July 2018, the tribunal had approved the INR 2,875-crore plan by the AION-JSW Steel consortium, which was the sole bidder for the assets. Monnet Ispat’s debt stood at INR 11,000 crore. Source : Mint
Shagang raises ferrous scrap buying price USD 12 per tonne SP Global reported that China's largest ferrous scrap consumer Jiangsu Shagang Group increased its buying price for heavy melting scrap by Yuan 80 per tonne (USD 12per tonne ) from Sunday due to tighter supply and slight rebound in domestic steel prices. As a result, Shagang will pay Yuan 2,650 per tonne, including value-added tax, delivered to Zhangjiagang, for heavy melting scrap with a minimum width of 6mm. The mill previously had lowered its buying price by Yuan 30/mt on December 26. Other major mills in eastern China like Nanjing Steel, Yonggang Steel, Zenith Steel and Maanshan Steel also followed Shagang and raised their scrap buying prices by Yuan 60-80/mt on Monday. The mill has rolled over its domestic rebar and wire rod list prices for sales over January 11-20, as S&P Global Platts reported. The price of Shagang's 16-25 mm diameter HRB 400 rebar will remain at Yuan 3,880 per tonne (USD 574 per tonne), including 16% VAT. Meanwhile, the most-traded rebar contract on the Shanghai Futures Exchange that for May delivery increased by Yuan 36 per tonne (or 1%) Monday to close at Yuan 3,575 per tonne. Source : SP Global
Port Hedland iron ore shipments to China jump 14% MoM in December Reuters reported that the Pilbara Ports Authority said that iron ore shipments to China from Australia’s Port Hedland terminal rose 14% in December from a month earlier. Iron ore shipments to China from the world’s biggest iron ore port totalled 37.4 million tonnes in December, compared with November’s 32.9 million tonnes Port Hedland is used by three of Australia’s top four iron ore miners, BHP Billiton, Fortescue Metals Group and Gina Rinehart’s Hancock Prospecting. Source : Reuters
ABP strengthens business with new steel contract at the Port of Immingham ABP says it has secured new business handling 40,000 tonnes of steel each year at the UK’s biggest port, the Port of Immingham. Freight forwarding company R.M. Maritime, has chosen ABP to expertly handle steel destined to be used in the construction industry in the UK. The first shipment saw ABP successfully discharge over 12,579 tonnes of steel beams from the 147-metre-long New Age vessel. The steel imported from United Arab Emirates will be stored externally and then distributed by road to Rainham Steel based in Scunthorpe. Simon Bird, ABP Humber Director, said: “We’re proud to be able to offer our customers expertise in handling a range of cargoes in an efficient and safe manor. We continually invest in our infrastructure and equipment to ensure that we are offering the best possible service. We look forward to continuing to build upon our strong relationship with R.M. Maritime to help serve the UK and beyond with vital construction materials.” Jon Brownbridge, R.M. Maritime Managing Director, added: “As dedicated steel freight forwarders, we’re delighted with the manner and professionalism of the operation shown by the entire ABP team; from the planning stages, the discharge of the vessel through to the forwarding of the cargo.” Source : Strategic Research institute
Beursblik: Morgan Stanley hervat volgen Aperam FONDS KOERS VERSCHIL VERSCHIL % BEURS Aperam 24,94 -0,61 -2,39 % Euronext Amsterdam (ABM FN) Morgan Stanley is donderdag weer begonnen met het volgen van Aperam met een Gelijkgewogen advies en een koersdoel van 30,00 euro. De analisten zien betere kansen in andere grondstoffenaandelen dan in roestvast staal. Ook zien zij neerwaartse risico's voor de winstontwikkeling in 2019. De waardering is een weerspiegeling van de zwakke rendementen in het verleden, aldus de zakenbank, maar anderzijds blijven de financiële risico's ook laag, met nauwelijks schulden bij Aperam. Het aandeel Aperam daalde donderdag 2,6 procent naar 24,89 euro. Door: ABM Financial News.pers@abmfn.be Redactie: +32(0)78 486 481 © Copyright ABM Financial News B.V. All rights reserved
Weer winstalarm voor Voestalpine Gepubliceerd op 17 jan 2019 om 08:30 | Views: 1.523 ArcelorMittal 16:09 19,22 -0,06 (-0,31%) WENEN (AFN/RTR) - De Oostenrijkse staalproducent Voestalpine heeft zijn tweede winstalarm in vier maanden tijd gegeven. Het concern maakt naar eigen zeggen extra kosten voor het opvoeren van de productie in de Verenigde Staten. Ook werden voorzieningen genomen vanwege een Duits kartelonderzoek. Voestalpine voorziet nu over het hele jaar een bedrijfsresultaat (ebit) van circa 750 miljoen euro. Eerder stond de prognose nog op bijna 1 miljard euro. In de eerste negen maanden van het jaar werd een resultaat van 525 miljoen euro in de boeken gezet.
High share of innovative products in sales of Belarusian steel mill BelTA reported that in 2018 the Belarusian steel mill BMZ shipped over 2.56 million tonnes of metal products, 106.2% as against 2017. Innovative products represented over 26% of the sold merchandise. BMZ Press Secretary Alexander Olesik told BelTA that in 2018 BMZ shipped over USD 580 million worth of innovative products to customers. The company started making 18 new kinds of products such as new varieties of round bars, rolled steel, reinforcing bars, and metal cord. BMZ did a lot of work with future in mind. As many as 25 R&D projects were completed. About USD 1.9 million was invested in research and development. Mr Alexander Olesik said that “Virtually all the money was spent in-house - by personnel of the research center, the technology department, the central company lab, and the design and reconstruction office.” He reminded that BMZ was certified as a research organization in 2017 upon the conclusion of the State Science and Technology Committee and the National Academy of Sciences of Belarus. In 2018 BMZ made the first few preproduction prototypes of new-design bronzed bead wire and metal cord for the world's leading tire manufacturers. The new products will be slated for commercial production after the necessary tests. At present BMZ owns 16 inventions, two utility models, and 51 trademarks. The public joint-stock company BMZ - managing company of the holding company BMC is a high-tech Belarusian metallurgical company. BMZ has four enterprises united by a single process flow a steel smelting division, a rolling division, a pipe division, and divisions making hardware items and supplying work tools and implements. BMZ exports over 80% of the output every year. Source : Belta
Trump Trade War - US steel companies face downturn after tariffs The Spec reported that in the 10 months since the Trump administration imposed 25 per cent tariffs on steel imports, prices in the United States have now fallen back to levels last seen before the tariffs were announced March 1. Hiring in the steel sector remains stagnant, in part because new mills have become more reliant on automation. Even with the opening and restarting of several mills last year, direct steel industry employment was 146,300 as of November 4 per cent lower than it was four years ago, according to the American Iron and Steel Institute. Industry analysts estimate that steel companies made 50 announcements of plans for new mills and investments last year and that three dozen plants were built or restarted. Investors are increasingly wary about the industry's long-term strength. Stock prices for some of the nation's biggest steel manufacturers dropped by as much as 47 per cent in 2018 amid fears of slowing global economic growth and the potential for Trump to reach trade deals that remove the tariffs. The Trump administration imposed sweeping steel and aluminum tariffs on trading partners like Europe, Canada, Japan and Mexico, saying it was trying to protect US security by preventing a flood of cheap metals into the United States. The tariffs, which went fully into effect in June, initially goosed steel prices in the United States, which jumped more than 50 per cent after it became clear that the tariffs would really be put in place. Source : The Spec
General Dynamics NASSCO Introduces New Steel Production Line On January 11, NASSCO, General Dynamics' shipbuilding division, officially commissioned a new production line that officials said would bolster the capabilities of its San Diego shipyard. The newly inaugurated panel line, which allows distortion-free welding of steel plates as small as 5 millimeters thick, will allow the defense contractor to produce more energy-efficient ships for both the commercial and government sectors. The line is also highly automated, with hybrid laser arc welding and robots that mill, seam, and weld steel panels a system that is expected to double steel processing rates and improve accuracy and quality. Officials said the facility is the only one of its kind in the world and is already transforming the contractor's operations. Four ships already underway in San Diego including two Maston container ships and an oiler for the US Navy will incorporate steel from the new line. General Dynamics NASSCO President Kevin Graney said that "Our team scouted thin-plate welding technology and processing facilities from around the world to identify the components that would allow NASSCO to stay at the forefront of shipbuilding manufacturing technology.” Source : Strategic Research Institute
Aantal posts per pagina:
20
50
100
Direct naar Forum
-- Selecteer een forum --
Koffiekamer
Belastingzaken
Beleggingsfondsen
Beursspel
BioPharma
Daytraders
Garantieproducten
Opties
Technische Analyse
Technische Analyse Software
Vastgoed
Warrants
10 van Tak
4Energy Invest
Aalberts
AB InBev
Abionyx Pharma
Ablynx
ABN AMRO
ABO-Group
Acacia Pharma
Accell Group
Accentis
Accsys Technologies
ACCSYS TECHNOLOGIES PLC
Ackermans & van Haaren
ADMA Biologics
Adomos
AdUX
Adyen
Aedifica
Aegon
AFC Ajax
Affimed NV
ageas
Agfa-Gevaert
Ahold
Air France - KLM
Airspray
Akka Technologies
AkzoNobel
Alfen
Allfunds Group
Allfunds Group
Almunda Professionals (vh Novisource)
Alpha Pro Tech
Alphabet Inc.
Altice
Alumexx ((Voorheen Phelix (voorheen Inverko))
AM
Amarin Corporation
Amerikaanse aandelen
AMG
AMS
Amsterdam Commodities
AMT Holding
Anavex Life Sciences Corp
Antonov
Aperam
Apollo Alternative Assets
Apple
Arcadis
Arcelor Mittal
Archos
Arcona Property Fund
arGEN-X
Aroundtown SA
Arrowhead Research
Ascencio
ASIT biotech
ASMI
ASML
ASR Nederland
ATAI Life Sciences
Atenor Group
Athlon Group
Atrium European Real Estate
Auplata
Avantium
Axsome Therapeutics
Azelis Group
Azerion
B&S Group
Baan
Ballast Nedam
BALTA GROUP N.V.
BAM Groep
Banco de Sabadell
Banimmo A
Barco
Barrick Gold
BASF SE
Basic-Fit
Basilix
Batenburg Beheer
BE Semiconductor
Beaulieulaan
Befimmo
Bekaert
Belgische aandelen
Beluga
Beter Bed
Bever
Binck
Biocartis
Biophytis
Biosynex
Biotalys
Bitcoin en andere cryptocurrencies
bluebird bio
Blydenstijn-Willink
BMW
BNP Paribas S.A.
Boeing Company
Bols (Lucas Bols N.V.)
Bone Therapeutics
Borr Drilling
Boskalis
BP PLC
bpost
Brand Funding
Brederode
Brill
Bristol-Myers Squibb
Brunel
C/Tac
Campine
Canadese aandelen
Care Property Invest
Carmila
Carrefour
Cate, ten
CECONOMY
Celyad
CFD's
CFE
CGG
Chinese aandelen
Cibox Interactive
Citygroup
Claranova
CM.com
Co.Br.Ha.
Coca-Cola European Partners
Cofinimmo
Cognosec
Colruyt
Commerzbank
Compagnie des Alpes
Compagnie du Bois Sauvage
Connect Group
Continental AG
Corbion
Core Labs
Corporate Express
Corus
Crescent (voorheen Option)
Crown van Gelder
Crucell
CTP
Curetis
CV-meter
CVC Capital Partners
Cyber Security 1 AB
Cybergun
D'Ieteren
D.E Master Blenders 1753
Deceuninck
Delta Lloyd
DEME
Deutsche Cannabis
DEUTSCHE POST AG
Dexia
DGB Group
DIA
Diegem Kennedy
Distri-Land Certificate
DNC
Dockwise
DPA Flex Group
Draka Holding
DSC2
DSM
Duitse aandelen
Dutch Star Companies ONE
Duurzaam Beleggen
DVRG
Ease2pay
Ebusco
Eckert-Ziegler
Econocom Group
Econosto
Edelmetalen
Ekopak
Elastic N.V.
Elia
Endemol
Energie
Energiekontor
Engie
Envipco
Erasmus Beursspel
Eriks
Esperite (voorheen Cryo Save)
EUR/USD
Eurobio
Eurocastle
Eurocommercial Properties
Euronav
Euronext
Euronext
Euronext.liffe Optiecompetitie
Europcar Mobility Group
Europlasma
EVC
EVS Broadcast Equipment
Exact
Exmar
Exor
Facebook
Fagron
Fastned
Fingerprint Cards AB
First Solar Inc
FlatexDeGiro
Floridienne
Flow Traders
Fluxys Belgium D
FNG (voorheen DICO International)
Fondsmanager Gezocht
ForFarmers
Fountain
Frans Maas
Franse aandelen
FuelCell Energy
Fugro
Futures
FX, Forex, foreign exchange market, valutamarkt
Galapagos
Gamma
Gaussin
GBL
Gemalto
General Electric
Genfit
Genmab
GeoJunxion
Getronics
Gilead Sciences
Gimv
Global Graphics
Goud
GrandVision
Great Panther Mining
Greenyard
Grolsch
Grondstoffen
Grontmij
Guru
Hagemeyer
HAL
Hamon Groep
Hedge funds: Haaien of helden?
Heijmans
Heineken
Hello Fresh
HES Beheer
Hitt
Holland Colours
Homburg Invest
Home Invest Belgium
Hoop Effektenbank, v.d.
Hunter Douglas
Hydratec Industries (v/h Nyloplast)
HyGear (NPEX effectenbeurs)
HYLORIS
Hypotheken
IBA
ICT Automatisering
Iep Invest (voorheen Punch International)
Ierse aandelen
IEX Group
IEX.nl Sparen
IMCD
Immo Moury
Immobel
Imtech
ING Groep
Innoconcepts
InPost
Insmed Incorporated (INSM)
IntegraGen
Intel
Intertrust
Intervest Offices & Warehouses
Intrasense
InVivo Therapeutics Holdings Corp (NVIV)
Isotis
JDE PEET'S
Jensen-Group
Jetix Europe
Johnson & Johnson
Just Eat Takeaway
Kardan
Kas Bank
KBC Ancora
KBC Groep
Kendrion
Keyware Technologies
Kiadis Pharma
Kinepolis Group
KKO International
Klépierre
KPN
KPNQwest
KUKA AG
La Jolla Pharmaceutical
Lavide Holding (voorheen Qurius)
LBC
LBI International
Leasinvest
Logica
Lotus Bakeries
Macintosh Retail Group
Majorel
Marel
Mastrad
Materialise NV
McGregor
MDxHealth
Mediq
Melexis
Merus Labs International
Merus NV
Microsoft
Miko
Mithra Pharmaceuticals
Montea
Moolen, van der
Mopoli
Morefield Group
Mota-Engil Africa
MotorK
Moury Construct
MTY Holdings (voorheen Alanheri)
Nationale Bank van België
Nationale Nederlanden
NBZ
Nedap
Nedfield
Nedschroef
Nedsense Enterpr
Nel ASA
Neoen SA
Neopost
Neovacs
NEPI Rockcastle
Netflix
New Sources Energy
Neways Electronics
NewTree
NexTech AR Solutions
NIBC
Nieuwe Steen Investments
Nintendo
Nokia
Nokia OYJ
Nokia Oyj
Novacyt
NOVO-NORDISK AS
NPEX
NR21
Numico
Nutreco
Nvidia
NWE Nederlandse AM Hypotheek Bank
NX Filtration
NXP Semiconductors NV
Nyrstar
Nyxoah
Océ
OCI
Octoplus
Oil States International
Onconova Therapeutics
Ontex
Onward Medical
Onxeo SA
OpenTV
OpGen
Opinies - Tilburg Trading Club
Opportunty Investment Management
Orange Belgium
Oranjewoud
Ordina Beheer
Oud ForFarmers
Oxurion (vh ThromboGenics)
P&O Nedlloyd
PAVmed
Payton Planar Magnetics
Perpetuals, Steepeners
Pershing Square Holdings Ltd
Personalized Nursing Services
Pfizer
Pharco
Pharming
Pharnext
Philips
Picanol
Pieris Pharmaceuticals
Plug Power
Politiek
Porceleyne Fles
Portugese aandelen
PostNL
Priority Telecom
Prologis Euro Prop
ProQR Therapeutics
PROSIEBENSAT.1 MEDIA SE
Prosus
Proximus
Qrf
Qualcomm
Quest For Growth
Rabobank Certificaat
Randstad
Range Beleggen
Recticel
Reed Elsevier
Reesink
Refresco Gerber
Reibel
Relief therapeutics
Renewi
Rente en valuta
Resilux
Retail Estates
RoodMicrotec
Roularta Media
Royal Bank Of Scotland
Royal Dutch Shell
RTL Group
RTL Group
S&P 500
Samas Groep
Sapec
SBM Offshore
Scandinavische (Noorse, Zweedse, Deense, Finse) aandelen
Schuitema
Seagull
Sequana Medical
Shurgard
Siemens Gamesa
Sif Holding
Signify
Simac
Sioen Industries
Sipef
Sligro Food Group
SMA Solar technology
Smartphoto Group
Smit Internationale
Snowworld
SNS Fundcoach Beleggingsfondsen Competitie
SNS Reaal
SNS Small & Midcap Competitie
Sofina
Softimat
Solocal Group
Solvac
Solvay
Sopheon
Spadel
Sparen voor later
Spectra7 Microsystems
Spotify
Spyker N.V.
Stellantis
Stellantis
Stern
Stork
Sucraf A en B
Sunrun
Super de Boer
SVK (Scheerders van Kerchove)
Syensqo
Systeem Trading
Taiwan Semiconductor Manufacturing Company (TSMC)
Technicolor
Tele Atlas
Telegraaf Media
Telenet Groep Holding
Tencent Holdings Ltd
Tesla Motors Inc.
Tessenderlo Group
Tetragon Financial Group
Teva Pharmaceutical Industries
Texaf
Theon International
TherapeuticsMD
Thunderbird Resorts
TIE
Tigenix
Tikkurila
TINC
TITAN CEMENT INTERNATIONAL
TKH Group
TMC
TNT Express
TomTom
Transocean
Trigano
Tubize
Turbo's
Twilio
UCB
Umicore
Unibail-Rodamco
Unifiedpost
Unilever
Unilever
uniQure
Unit 4 Agresso
Univar
Universal Music Group
USG People
Vallourec
Value8
Value8 Cum Pref
Van de Velde
Van Lanschot
Vastned
Vastned Retail Belgium
Vedior
VendexKBB
VEON
Vermogensbeheer
Versatel
VESTAS WIND SYSTEMS
VGP
Via Net.Works
Viohalco
Vivendi
Vivoryon Therapeutics
VNU
VolkerWessels
Volkswagen
Volta Finance
Vonovia
Vopak
Warehouses
Wave Life Sciences Ltd
Wavin
WDP
Wegener
Weibo Corp
Wereldhave
Wereldhave Belgium
Wessanen
What's Cooking
Wolters Kluwer
X-FAB
Xebec
Xeikon
Xior
Yatra Capital Limited
Zalando
Zenitel
Zénobe Gramme
Ziggo
Zilver - Silver World Spot (USD)