Ontvang nu dagelijks onze kooptips!

word abonnee
Van beleggers
voor beleggers
desktop iconMarkt Monitor
  • Word abonnee
  • Inloggen

    • Geen account? Registreren

    Wachtwoord vergeten?

Koffiekamer« Terug naar discussie overzicht

3D printing

6.215 Posts
Pagina: «« 1 ... 182 183 184 185 186 ... 311 »» | Laatste | Omlaag ↓
  1. nobahamas 27 november 2017 14:24
    quote:

    mjmj schreef op 25 november 2017 12:20:

    Noba, in hoeverre is MLTS een interessante overname prooi voor Philips?

    (ik kwam op het idee n.a.v. dit artikel: www.iex.nl/Nieuws/ANP-251117-023/Phil...
    siemens kan natuurlijk ook:
    press release; Materialise and Siemens Healthineers syngo.via Partner to Bring 3D Printing to Hospitals Worldwide
    investors.materialise.com/phoenix.zht...
  2. mjmj 27 november 2017 21:04
    quote:

    nobahamas schreef op 27 november 2017 14:24:

    [...]
    siemens kan natuurlijk ook:
    press release; Materialise and Siemens Healthineers syngo.via Partner to Bring 3D Printing to Hospitals Worldwide
    investors.materialise.com/phoenix.zht...
    Ja jammer. Zag ergens dat Philips deals heeft met de 2 marktleiders.
  3. nobahamas 27 november 2017 22:34
    quote:

    haas schreef op 27 november 2017 22:27:

    mss moet je meer denken aan dat de groten zoals Philips interesse hebben in bedrijven die robots maken (bijv voor oogoperaties ?)

    bedrijven die software maken zoals MTLS zullen zich wss als zelfstandig bedrijf omhoog werken ?
    Dat denk ik ook Haas, bij een overname heb je geen zekerheid dat de excellente teams ook zullen blijven, zeer vaak kiezen zij dan ook hun eigen pad.
    Materialise heeft een zeer divers verdienmodel met meerdere drivers die elkaar versterken / ondersteunen. Een combinatie die je elders niet vindt.
    Daarom in mijn visie ook niet echt een overname-prooi.
  4. forum rang 10 voda 1 december 2017 20:43
    Europe’s first 3D-printed building has been completed
    Published on Fri, 01 Dec 2017

    BDC reported that 3D Printhuset’s The BOD (Building On Demand) is a demonstration project in Copenhagen that recently became the first 3D-printed building in Europe. The printing began on Sept. 11 and was expected to take a few weeks to complete but ended up taking almost twice the scheduled time.

    The 3D printing was not the issue that caused the delay, however. The problems were encountered in other areas that the 3D printing was dependent upon.Mr Henrik Lund-Nielsen, CEO at 3D Printhuset, the company behind the project said that "Realizing the delay we have had, perhaps we were too optimistic with our planning. However, it is very difficult to plan for problems that you have never tried before. This was the first time anybody applied this technology in Europe.”

    The entirety of the project took twice as long as expected, but the actual time spent 3D printing the walls took the planned 50 hours. The difficulties that led to the delay had to do with the material handling prior to printing. Faulty material deliveries and equipment failures related to the material handling were the biggest issues.

    Detailed information regarding the construction process of The BOD will be presented in detail during a 3D construction printing conference in Copenhagen.

    Source : BDC Network
  5. MadMushroom 14 december 2017 18:18
    quote:

    nobahamas schreef op 12 december 2017 22:57:

    Bijzonder om te zien hoe een fonds als Materialise binnen drie dagen 15% omlaag gedirigeerd wordt door machtige shorters.
    Er rest ons niets dan wachten tot het tij keert, en mee omhoog gaan wanneer het mag.
    Ik wacht en kijk toe.
    finance.google.com/finance?q=NASDAQ%3...
    Inderdaad. En weer niet de ballen gehad om even uit te stappen. Voor de zoveelste keer...in tussentijd wel mijn positie in DDD versterkt. Aan een mooi herstel begonnen daar!
6.215 Posts
Pagina: «« 1 ... 182 183 184 185 186 ... 311 »» | Laatste |Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met je emailadres en wachtwoord.