Ontvang nu dagelijks onze kooptips!

Koffiekamer« Terug naar discussie overzicht

ABB?

Volgen

361 Posts

Pagina: «« 1 ... 14 15 16 17 18 19 »» | Laatste | Omlaag ↓

voda 16 november 2021 07:30
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB Supplying Electrical Package for Heat Pump

Strategic Research Institute
Published on :
16 Nov, 2021, 5:30 am

ABB will deploy its complete electrical, instrumentation and control package, motors and variable speed drives for the powerhouse of the heat pump, which will be the world’s largest seawater heat pump based on CO2 as refrigerant. With Esbjerg facing the UNESCO world heritage area of the Wadden Sea, the careful selection of the right pump was essential. The 50 MW seawater heat pump system from MAN Energy Solutions, a long-standing customer of ABB, converts electrical energy into thermal energy and uses toxicologically safe CO2 as a refrigerant for the entire system cycle.

As part of their 2030 strategy to pursue a 100 percent fossil free heat production with zero loss of applied resources, DIN Forsyning is developing a new hybrid renewable district heat plant to replace heat currently supplied by Esbjerg coal-fired combined heat and power plant. For the CHP plant, which produces about half of all district heating for Esbjerg, to be decommissioned in April 2023, DIN Forsyning had to be ready with alternative heat sources for the district heating, which can reduce primary energy consumption by 50 percent and generate low-carbon energy from heat pumps.

ABB’s technology will contribute to the replacement of the coal-fired plant as the main source of heat for the city of Esbjerg and get closer to the goal of reducing carbon emissions in the city. It will also be deployed to ensure that the entire heating network can be powered from renewables, and distributed to the plant, through connections to the offshore wind turbines in the North Sea. In addition, ABB will supply a medium voltage variable speed drive, motors, as well as electrical and control solutions to support the high efficiency of the system and the accurate control of this massive heat pump.

0
”
Quote Reageren

Niet oké
voda 23 november 2021 06:48
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB Deploys Augmented Reality for Remote Testing at GS Wire Spain

Strategic Research Institute
Published on :
23 Nov, 2021, 5:29 am

Global technology company ABB is providing a package of metals industry-specific digital-ready solutions, including drives, controller and converter infrastructure, to enable CELSA Group’s Global Steel Wire to modernize operations at its Santander steel mill. Global Steel Wire manufactures and brings to market a range of steel products, including wire rod, cables and ropes. Its high-quality steel cables are used extensively in the automotive industry as well as in mattress springs. The steelmaker had been exploring the use of digital technologies to optimize its rolling wire production and will now benefit from the expertise and metals industry domain knowledge of ABB.

As part of the contract, ABB will provide its medium voltage drives for high power applications, MEGADRIVE-LCI, together with AC 800PEC controllers. MEGADRIVE-LCI is an advanced type of converter that enables variable speed control and soft starting of large synchronous machines for many industrial applications. The technology will deliver reliability using a fuseless drive design and robust thyristor components, which enable fast and successful start-up. The demand-based medium voltage drives will result in optimized power consumption and higher process efficiency.

Teams from the two companies had the chance to incorporate the use of augmented reality during the Factory Acceptance Test, with representatives at the LCI factory in Switzerland collaborating with others in Spain. It encompassed audio, video, document-sharing and live annotations. This allowed progress to continue during the COVID-19 travel limitations.

The use of proven ABB technology will allow GSW to save energy and reduce its carbon emissions through increased efficiencies. The drives voltage scalability minimizes harmonic influence on the supply system and a converter efficiency of more than 99 percent will ensure that the system works for many years. Additionally, the AC 800PEC controller for regulation management is one of the fastest on the market.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 30 november 2021 07:21
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB Ability Smart Melt Shop Solution for Steel MeltShop Operations

Strategic Research Institute
Published on :
30 Nov, 2021, 4:57 am

Technology leader ABB has launched ABB Ability Smart Melt Shop, the first smart factory digital application of its kind for the metals industry. It is designed to increase melt shop productivity, save energy and improve employee safety, with payback within six months. Based on advanced digital algorithms, the new solution is unique in that it offers not only powerful real-time ladle tracking but also automated crane scheduling and a predictive thermal modelling engine. The tracking engine follows ladle movement via cranes and transfer cars in real time. Radar and laser positioning technologies provide accurate visualization while reducing hardware footprint and maintenance needs compared to radio-frequency identification solutions. The automated crane scheduling includes job forecasting, route planning and automatic acknowledgement of jobs. This will enable steelmakers to move towards autonomous operations by eliminating manual co-ordinations, with increased safety in hot zones due to lower footfall.

The thermal engine function uses ladle thermal history from the tracking engine and forecasted heat movement from scheduling engines to predict the thermal loss during ladle transfer and predicts the correct lift temperature at ladle furnace. This results in better superheat compliance at the caster, eliminating caster slowdowns, hence increasing productivity. Steelmakers can expect ABB Ability Smart Melt Shop to help increase superheat compliance to enable 4-5 percent higher casting speeds to improve productivity and reduce arcing by 5 degrees Celsius per heat in ladle furnaces for increased energy and cost efficiency.

This application uses all standard communications protocols, employs ABB’s multi-layered defense-in-depth approach to cyber security and is compatible with both ABB and third-party systems. Benefits of ABB Ability Smart Melt Shop include

Productivity

4-5 percent increased casting speed due to better superheat compliance

Reduced tapping delays, in EAF or converter due to more efficient scheduling of cranes for ladle movement

Better ladle management and maintenance planning thanks to access to historical data on all movements

Increased manpower productivity since no manual intervention or acknowledgement is required

Energy efficiency

5 degrees Celsius less arcing per heat (batch) in ladle furnace using thermal models to accurately predict target lift temperature

Improved decision-making thanks to forecasting of ladle movements and crane schedules

Safety

Increased safety with less footfall in hot zones which would otherwise be needed to manage ladle and crane movement

ABB Ability Smart Melt Shop has already been installed by JSW Steel Ltd. It is expected to increase the company’s EBITDA profit by around USD 2 million per annum through 4 percent higher casting speeds, time savings of one working day per month and additional output equating to 24,000 tonnes a year.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 1 december 2021 08:15
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
Wartsila & RINA to Deliver Hydrogen Fuel Solutions

Strategic Research Institute
Published on :
01 Dec, 2021, 5:30 am

The technology group Wärtsilä, together with class society RINA, ABB, Helbio, a subsidiary of Metacon AB, the Liberian Registry and energy major have joined forces in an effort to deliver a solution with hydrogen as fuel. The aim is to have a scalable and sustainable solution that will exceed the IMO 2050 target for a 70 percent reduction in carbon intensity without the need for an extensive infrastructure investment. This offers the shipping industry a pathway to low-carbon operations within a reasonable time frame.

Current difficulties and cost considerations regarding the production, distribution, and onboard storage of hydrogen have so far limited the sector’s interest in its direct use as a marine fuel. However, by producing hydrogen onboard, and using readily available LNG, the solution becomes far more viable and in a much faster time than would otherwise be possible.

The concept is based on combining LNG with steam to produce hydrogen and CO2. The hydrogen produced will be used directly in a mix with natural gas in internal combustion engines or in fuel cells, thus eliminating the need for hydrogen to be stored onboard. The CO2 will be liquefied using the cryogenic stream of LNG that would be used as fuel anyway, and later disposed ashore for carbon storage. Tankers can use the stored CO2 as inert gas during discharge.

The necessary equipment can easily be fitted on the deck of a commercial vessel. This innovative concept will support the marine sector’s gradual transition from LNG to hydrogen, without any major adjustments to a vessel’s onboard technologies.

Only LNG bunkering will be required and, by progressively increasing the production of hydrogen, the consumption of fossil methane and associated methane slip will be reduced at the same rate.

Wärtsilä and ABB will support the application of hydrogen in powering internal combustion engines and fuel cells respectively, while Helbio will provide the technology and manufacturing of gas reformers. RINA and the Liberian Registry will provide advice and guidance on the application of rules and regulations for novel concept alternative designs, based on Hazid/Hazop analyses, as well as specific rules for this kind of arrangement.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 15 december 2021 08:26
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB powers Red Sea Tourism Project with Smart Energy Technology

Strategic Research Institute
Published on :
15 Dec, 2021, 5:30 am

ABB has been appointed to ‘power’ the Red Sea Project, Saudi Arabia’s biggest sustainable tourism scheme owned by the Public Investment Fund. Spanning 28,000 square kilometers, the project is one of the world’s most ambitious regenerative tourism projects and will bring together the natural world with first class personalized accommodation, across an archipelago of more than 90 islands.

To protect the area’s outstanding natural beauty, the Red Sea Project is committed to environmental sustainability. This includes the regulation of fisheries, removal of invasive species, the creation of conservation zones and the expansion of green and blue habitats to encourage regeneration and carbon sequestration, as well as sympathetic and innovative construction methods.

ABB has started work with The Red Sea Development Company to supply power systems and digital solutions that will enable the resort to run on 100 percent renewable energy when it opens to the public in 2030. The installation includes 10 System pro E power Low Voltage synchronization panels, rated 2500 up to 6300 Amps, which will generate 36MW power out of the 69 generators that will be installed at the Red Sea site.

This use of smart low voltage synchronization panels will be supported by ABB Ability Energy and Asset Manager, a state-of-the-art cloud solution that integrates energy and asset management in a single intuitive dashboard. This integrated digital solution will provide the resort’s facilities team with total visibility on how their assets and the electrical system is performing. Using this real time operational data and analytics will provide insights to make informed decisions that will optimize performance and reduce operating costs. By monitoring data and taking corrective actions, the solution can reduce unplanned downtime to ensure continuous power supply and save up to 45 percent on operating expenses.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 16 december 2021 11:18
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB Electromagnetic Stirring to Help Steel Makers Improve Quality

Strategic Research Institute
Published on :
16 Dec, 2021, 5:12 am

Global technology company ABB has launched its Tundish EMS solution to enable steelmakers to overcome the limited ability of the tundish vessel in controlling the flow of molten metal, and therefore steel quality and temperature. Tundish EMS is placed on the outside of the tundish and uses non-contact electromagnetic stirring technology to generate an electromagnetic field that creates a stirring effect in the bath melt. This continuous stirring significantly increases mixing zone volume for virtually the entire tundish, with higher flow speeds, elimination of dead zones and homogenization of temperature.

Adoption of this electromagnetic stirring technology will be particularly important for steelmakers with multiple casting strands coming from one tundish. It will mean greater removal of inclusions, resulting in smoother, cleaner steel and reductions in nozzle clogging. By creating a stirring flow throughout the entire tundish melt bath, Tundish EMS delivers rapid homogenization of temperature and chemical composition that results in better quality steel, more uniform and repeatable casting conditions across multiple strands and overall improved quality, productivity and profitability in billet and bloom casting and metal powder production.

Tundish EMS offers several new functionalities including flexibility in stirring force and direction and the ability to stir and control the flow field in the whole melt volume of the tundish. This means that steelmakers no longer have to rely solely on the limited ability of tundish furnishings for control of molten metal flow, where often significant dead zones lead to temperature variations and where smaller inclusions or inclusion clusters cannot be removed. A variety of Tundish EMS installation configurations are available for most tundish types.

Tundish EMS enhances quality, productivity and profitability in a number of ways. As well as improving non-metallic inclusion removal and overall steel cleanliness, it also provides temperature homogenization and stability throughout the entire tundish melt bath, reducing superheat and enhancing uniformity of temperature across various strands. Overall process repeatability and reliability is improved and costs are reduced by lowered consumption of tundish furniture such as dam, weir and baffle materials.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 20 december 2021 08:15
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB & AWS to Develop Electric Operations for Net Zero Mining

Strategic Research Institute
Published on :
20 Dec, 2021, 5:32 am

Global technology leader ABB has announced it is working with Amazon Web Services to accelerate the adoption of new and sustainable technologies in mining. The two companies are now creating solutions for digitally integrated all-electric operations to help meet industry goals on net-zero emissions. In a first demonstration, ABB Ability Operations Management System has already been integrated with heavy-duty EV drivetrain developer MEDATech’s cloud data collection system on AWS. Telemetry data, including battery state and speed of charge, was transmitted in real time from MEDATech’s first-ever 100 percent electric haul truck, paired with ABB’s fast charging pilot solution ABB Ability eMine FastCharge, while ensuring data security using AWS’s Internet of Things services. The team used the gathered data to perform a real-time production optimization for test purposes as shown at MINExpo in Las Vegas in September 2021.

Such seamless digital integration of electrical equipment across industrial operations is increasingly important for operational efficiencies through optimized scheduling and planning. Battery electric vehicles (BEVs) and their related charging infrastructure present a challenge and an opportunity as the industry commits to decarbonization and reduced resources and energy consumption.

ABB and AWS are also proving scalability. AWS enables OMS to ingest, store, process, and analyze operational data from stationary and mobile equipment and dynamically scales to meet the operational demands. The new ABB Ability™ eMine approach relies on the reliable and standardized exchange of equipment and process data to effectively integrate electrical and digital systems from mine to port. ABB is simplifying the integration for its mining customers via a collaborative and interoperable approach, leveraging AWS, which removes management and investment responsibilities normally associated with on-premises infrastructure from the customer.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 20 december 2021 08:57
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB & HydrogenPro to Optimize Green Hydrogen Production

Strategic Research Institute
Published on :
20 Dec, 2021, 5:30 am

ABB has signed an order with HydrogenPro, a hydrogen plant company, to provide electrical equipment for the world’s largest single stack high-pressure alkaline electrolyser - a system that generates hydrogen by using electricity to split water into hydrogen and oxygen. Once deployed, at a specially built test facility in Herøya, Norway in 2022, the system will be capable of producing 1,100 normal cubic metres of green hydrogen per hour. ABB’s scope will include an integrated electrical package comprising transformers, rectifiers, DC Chokes and Busbars. Hydrogen is very energy intensive to produce sustainably - everything in the production process, each little component adds a little bit of inefficiency, so this integrated portfolio approach will ensure that every single, possible improvement in efficiency is made.

The validation program will include rigorous testing to see how the performance criteria and efficiency of the electrolyser can be optimized. This will enable HydrogenPro to make further improvements to the electrolyser system before introducing similar technology on a long-term, large scale at similar facilities around the world.

This collaboration follows a two-year partnership with HydrogenPro and represents ABB’s first green hydrogen order in Norway.

This program into scaling and testing hydrogen technology to enable global decarbonization goals will pave the way for the launch of large green hydrogen plants in the future, which are key to reducing global CO2 emissions.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 21 december 2021 08:20
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB EV Charges for Milan’s Electric Bus Network of ATM

Strategic Research Institute
Published on :
21 Dec, 2021, 5:31 am

As a leading global supplier of e-mobility technology, ABB worked with Milan’s public transport company ATM (Azienda Trasporti Milanesi) to deliver a turnkey solution for its San Donato depot. This is the first of four fully electrical depots planned for the city and a pilot site for innovative new charging solutions. Designed with sustainability and longevity in mind, the installation at San Donato will help ATM meet its forecast to reduce diesel demand by 30 million liters per year and cut CO2 emissions by 75,000 tons per year by 2030.

ABB’s Terra 124 chargers have been installed in the depot’s parking area. One charger can fast charge two vehicles at the same time, optimizing the installation cost and minimizing impact. The e-buses are scheduled to charge during the night when it is more cost effective, and with a range of up to 180km in normal conditions, this is enough for the e-buses to remain in use all day without the need for interim charging.

As the pilot charging site is focused on using the most innovative and energy efficient solutions, ABB’s package also included the installation of a 324 kWh Energy Storage Solution. The ESS allows ATM to manage their grid consumption. It also allows understanding of the use cases for an ESS, when coupled with charging infrastructure, for simulating potential second-life use case for bus battery packs when they are available in the future.

To complete the installation an ABB EV Site Solution controller was commissioned. It optimizes the ESS recharging process while minimizing energy demand and reduces operating costs by controlling in real time the total peak consumption.

The ABB Ability Connected Services Portfolio of digital solutions, which allows for remote diagnosis and management of the chargers, was also utilized, helping improve and extend its operating life. In addition, ABB supplied its medium-voltage UniSec air insulated switchgear with its innovative AirPlus insulation gas inside the apparatus. An alternative to SF6, the world’s most potent greenhouse gas, AirPlus can reduce the global warming impact by almost 100 percent.

Bijlage:

0
”
Quote Reageren

Niet oké
Willy B. 23 december 2021 13:22
   Willy B.

Lid sinds: 27 okt 2020

Laatste bezoek: 15 apr 2024

   Aanbevelingen

Ontvangen: 254

Gegeven: 193

   Aantal posts: 719
Dit lijkt me een onderbelicht bedrijf in het kader van energietransitie

0
”
Quote Reageren

Niet oké
voda 23 december 2021 17:05
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB
Tweede op de lijst is de Zweeds-Zwitserse automatiseringsspecialist ABB. Hafkamp: "Volgend jaar zal de trend reshoring in alle hevigheid losbarsten. Steeds meer producenten hebben tijdens de pandemie meegemaakt dat het hebben van een productielocatie ver weg (vanwege de lage lonen) niet ideaal is. Daarom halen ze de productie (van onder andere voeding, chips, accu’s) terug naar 'huis'. Dit houdt in dat er veel nieuwe fabrieken gebouwd/gerenoveerd zullen worden die volledig moeten voldoen aan de ESG-normen van tegenwoordig. Dit betekent robotisering, verduurzaming, automatisering etc. ABB is een van de aangewezen partners hiervoor."

"Daarnaast koopt ABB aandelen terug, wat gunstig is voor de winst per aandeel. Het dividendrendement is aantrekkelijk en de recente plannen om de e-mobility-divisie (laadpalen) naar de beurs te brengen zorgen voor nog veel meer cash dat deels naar de aandeelhouder zal vloeien. Belangrijk is dat de voorraadtekorten die ABB nu ondervindt snel worden opgelost. Het management is daar zelf erg voorzichtig over en voorziet dat er tot ver in 2022 sprake zal zijn van tekorten. Desondanks verhoogde men tijdens de Capital Markets Day de verwachting voor de winst en omzet in 2022."

www.belegger.nl/Column/735416/Kooplij...

0
”
Quote Reageren

Niet oké
Willy B. 1 februari 2022 10:00
   Willy B.

Lid sinds: 27 okt 2020

Laatste bezoek: 15 apr 2024

   Aanbevelingen

Ontvangen: 254

Gegeven: 193

   Aantal posts: 719
Wat is de mening van de volgers van ABB?

Ik zie in dit bedrijf een enorm potentieel binnen de energietransitie (opslag, laadpalen, automatisering, ...). Zijn ze overgewaardeerd, ondergewaardeerd?

Ik merk dat ze van plan zijn hun laadpalendivisie misschien af te splitsen, waardoor ze meer cash genereren.

Ik ben al ingestapt maar ben aan het twijfelen om, na deze correctie van de voorbije weken, bij te kopen. Alle input is welkom.

0
”
Quote Reageren

Niet oké
Quasi 1 februari 2022 10:52
   Quasi

Lid sinds: 06 jul 2019

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 32

Gegeven: 47

   Aantal posts: 223
quote:
Willy B. schreef op 1 februari 2022 10:00:
Wat is de mening van de volgers van ABB?

Ik zie in dit bedrijf een enorm potentieel binnen de energietransitie (opslag, laadpalen, automatisering, ...). Zijn ze overgewaardeerd, ondergewaardeerd?

Ik merk dat ze van plan zijn hun laadpalendivisie misschien af te splitsen, waardoor ze meer cash genereren.

Ik ben al ingestapt maar ben aan het twijfelen om, na deze correctie van de voorbije weken, bij te kopen. Alle input is welkom.
Ik heb ze ook al een tijdje in mijn portefeuille maar sta nog op een kleine min door die correctie. Die correctie vond ik voor ABB eigenlijk wel nog meevallen. Ik blijf ze behouden maar koop niet meer bij, gewoon om de reden dat ik een kleine belegger ben en met het beetje geld waarmee ik beleg toch spreiding wil in mijn portefeuille.
Trouwens ben ik niet de enige fan van ABB, ook Martine Hafkamp is fan. Hieronder een stukje van haar mening over ABB:

Tweede op de lijst is de Zweeds-Zwitserse automatiseringsspecialist ABB. Hafkamp: "Volgend jaar zal de trend reshoring in alle hevigheid losbarsten. Steeds meer producenten hebben tijdens de pandemie meegemaakt dat het hebben van een productielocatie ver weg (vanwege de lage lonen) niet ideaal is. Daarom halen ze de productie (van onder andere voeding, chips, accu’s) terug naar 'huis'. Dit houdt in dat er veel nieuwe fabrieken gebouwd/gerenoveerd zullen worden die volledig moeten voldoen aan de ESG-normen van tegenwoordig. Dit betekent robotisering, verduurzaming, automatisering etc. ABB is een van de aangewezen partners hiervoor."

"Daarnaast koopt ABB aandelen terug, wat gunstig is voor de winst per aandeel. Het dividendrendement is aantrekkelijk en de recente plannen om de e-mobility-divisie (laadpalen) naar de beurs te brengen zorgen voor nog veel meer cash dat deels naar de aandeelhouder zal vloeien. Belangrijk is dat de voorraadtekorten die ABB nu ondervindt snel worden opgelost. Het management is daar zelf erg voorzichtig over en voorziet dat er tot ver in 2022 sprake zal zijn van tekorten. Desondanks verhoogde men tijdens de Capital Markets Day de verwachting voor de winst en omzet in 2022."

Groeten, Quasi.

0
”
Quote Reageren

Niet oké
voda 3 februari 2022 06:52
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB’s Single-Phase Power Supplies Reduce Harmful CO2 Emissions

Strategic Research Institute
Published on :
03 Feb, 2022, 5:30 am

ABB launches its new CP-S.1 range of primary switch mode 24 V DC power supplies, combining efficiency and reliability with an unrivalled power-to-space ratio. With an efficiency of up to 94 percent, the CP-S.1 24/40.0 power supply is able to generate a 1.4 ton CO2 saving over a typical lifetime of ten years – compared to a device with 92 percent efficiency. This is equivalent to the same amount of CO2 required to charge 160,000 smartphones. The pioneering range also offers an unrivalled power-to-space ratio – delivering space savings of up to 50 percent – and thanks to its high efficiency and reduced power loss credentials, is a cost-saving power supply solution for large scale applications.

CP-S.1’s extra power reserve functionality provides additional power of up to 150 percent for five seconds, enabling heavy loads to be started reliably. The certified AC and DC input voltage range is suitable for worldwide installation and has extensive global approvals.

The robust design, which incorporates a PCBA coating and marine certification, makes the CP-S.1 power supplies ideal for OEM machine building, marine, solar and wind applications. While the small footprint, efficiency levels and industry-leading features, such as overheat protection, active power correction and the broadly certified AC and DC input range, make them ideal for applications in robotics, materials handling, packaging, EV charging, food and beverage, genset, UPS and renewables.

Together with CP-C.1, CP-E, CP-D, and three-phase CP-T range, ABB provides complete and suitable power supply solutions for all applications - from high-end to economic; from industry control to building segments.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 4 februari 2022 08:54
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
Industrieel conglomeraat ABB brengt divisie duurzame mobiliteit naar de beurs
Van onze redacteur 3 feb 22:14

Het Zweeds-Zwitserse industriële concern ABB wil zijn e-mobilitydivisie in het tweede kwartaal naar de beurs brengen. Met een beursgang in Zürich wil het conglomeraat tenminste $750 mln (€655 mln) ophalen, zo heeft cfo Björn Rosengren donderdag bij de presentatie van de jaarcijfers gezegd.

Het gaat om de divisie die zich bezighoudt met het ontwikkelen, produceren, installeren en onderhouden van laadinfrastructuur voor elektrische voertuigen. Het geld dat ABB met de beursgang ophaalt wordt volgens Rosengren opnieuw in het dochterbedrijf geïnvesteerd om de groei verder aan te jagen.

De e-mobilitydivisie maakt volgens Rosengren een ‘zeer sterke groei’ door en is winstgevend. De Zwiterse zakenbank UBS en de Amerikaanse branchegenoot zullen de beursgang begeleiden.

Lees het volledige artikel: fd.nl/bedrijfsleven/1429155/industrie...

1
”
Quote Reageren

Niet oké
voda 14 februari 2022 07:41
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB Bags Traction & Battery Order for Spanish Trains

Strategic Research Institute
Published on :
14 Feb, 2022, 7:13 am

ABB has won orders worth around USD 80 million from Stadler for energy-efficient traction and high-performance battery technologies for high-capacity commuter trains. Many of these trains will strengthen the short-distance transportation network in Spain serving more than one million commuters every day in some of Spain’s largest cities such as Madrid and Barcelona. The orders also include traction equipment for new locomotives.

The orders include state-of-the-art compact traction converters and high-power lithium-ion battery based on-board energy storage systems to power 59 new generation high-capacity double-deck commuter trains for Spain’s state-owned rail operator Renfe. The orders were booked in the fourth quarter of 2021.

ABB technologies will help to increase reliable service for commuters in Spain’s major metropolitan areas including Madrid and Barcelona.

The new high-capacity commuter trains will operate on 3kV direct current overhead lines and are also equipped with traction batteries for emergency use and depot maneuvering. The new fleet, equipped with highly compact, efficient, and all roof mounted ABB traction technology, will increase passenger capacity, while at the same time contributing to more sustainable transportation.

ABB’s lithium-ion on-board energy storage system is used as alternative power source to help ensure reliable and punctual train services in the event of catenary failure. The energy storage system may also serve as the primary power source for maneuvering in depots or cleaning rail yards without catenary supply infrastructure.

The compact traction equipment converts the electrical energy from the overhead power line or battery into the needed voltage and frequency to drive the traction motors. Its compact design and high energy efficiency performance will save space, reduce weight, and save energy in these trains.

0
”
Quote Reageren

Niet oké
voda 14 februari 2022 07:58
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB & PACCAR EV Chargers for Trucks

Strategic Research Institute
Published on :
14 Feb, 2022, 5:30 am

ABB is partnering with PACCAR, a global leader in the design, manufacture, and customer support of high-quality premium trucks, to provide PACCAR dealers and their customers with a range of advanced charging solutions across its fleet operations in North America and Europe. In the United States alone, medium- and heavy-duty trucks account for approximately 25 percent of the total greenhouse gas emissions from the transportation sector.1

These innovative electric vehicles have batteries that are powerful enough for Peterbilt, Kenworth, DAF CF Electric and LF Electric truck models that require on-demand fast charging for the short dwell times of their fleet routes. ABB’s charging systems help optimize fleet charging with high-power, quick charge breaks or lower power, load-managed overnight charging for longer haul routes and last mile delivery.

Both companies are committed to sustainably serving their customers as well as their own operations. All PACCAR manufacturing locations are ISO 14001 certified, and more than 80 percent are zero-waste-to-landfill, while ABB is progressing toward circular operations as well as carbon neutrality by electrifying its vehicle fleet, sourcing 100 percent renewable electricity, and improving energy efficiency across its sites by 2030.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 15 februari 2022 08:22
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB to Power & Automate ioneer US mine

Strategic Research Institute
Published on :
15 Feb, 2022, 5:30 am

ABB has won a large contract from Australian-listed ioneer Ltd, an emerging lithium-boron supplier committed to becoming an important producer of materials necessary for a sustainable future, for project management, engineering and the supply of power and automation systems. The contract is part of a development program at the customer’s Rhyolite Ridge Lithium-Boron Project in Nevada, US, the only known lithium-boron deposit in North America and one of two such deposits in the world. Financial details of the contract were not disclosed. The order was booked in the first quarter of 2022.

Under the contract, ABB will commence work on systems engineering and optimization for the equipment packages, which include a steam turbine generator, medium and low voltage electrical distribution, power management and plant-wide process automation and instrumentation systems for the power generation, acid and lithium-boron processing plants.

ABB will use its comprehensive ABB Ability MineOptimize approach and portfolio of optimized engineering, products and systems, electrification and automation solutions, digital applications and remote services. MineOptimize integrates individual mining solutions into a connected and structured plant-wide system to optimize all stages in the lifecycle – from design and build to operation and service – of any open-pit or underground mine and minerals processing plant. This approach helps mining companies optimize CAPEX and maximize productivity, sustainability and safety.

The site at Rhyolite Ridge is the only known lithium-boron deposit in North America and one of only two such deposits in the world. It is expected to become a globally significant, long-life, cost-effective source of lithium and boron vital to a sustainable future. The unique mineralogy, together with the use of ABB’s commercially proven equipment and technology, allows lithium and boron to be extracted in a low-cost and environmentally sustainable manner.

0
”
Quote Reageren

Niet oké
voda 28 februari 2022 06:09
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
ABB & Ballard Progress with Fuel Cell-Powered Marine Transport

Strategic Research Institute
Published on :
28 Feb, 2022, 5:30 am

ABB and Ballard are progressing with their industry-leading partnership to decarbonize marine transport and have received an AiP from DNV for their high-power fuel cell concept, the development of which was launched in 2018. An AiP is a major milestone in developing new technology as an independent assessment of the concept, confirming that the design is feasible and no significant obstacles exist to prevent the concept from being realized. With the AiP in place, the jointly developed solution can be completed within the next couple of years for application onboard a wide range of vessels.

The high-power fuel cell unit is a flexible solution that will support the energy needs of a diverse range of vessels requiring multiple 3 MW blocks of power. A cruise vessel operating in coastal areas could either run entirely on fuel cell power or switch to it when operating in environmentally sensitive areas or emission control zones, while a ferry with a regular schedule and frequent bunkering opportunities could operate solely on fuel cell power. For ocean going vessels, fuel cell power could support auxiliary needs. The concept of the solution also envisions the integration with an energy storage system.

The successful development of a high-power fuel cell system concept builds on a collaboration between ABB and Ballard, the leading global provider of proton exchange membrane (PEM) fuel cell solutions, initiated in June 2018. As part of its strategy to develop alternative emission-free technologies, ABB is already well advanced in collaborative development of fuel cell systems for ships. Considered among the most promising technologies available in terms of greenhouse gas reduction, zero-emission hydrogen fuel cells are already powering smaller vessels over short distances and the technology is on the verge of being ready for installation on larger ships.

Bijlage:

0
”
Quote Reageren

Niet oké
voda 1 maart 2022 07:53
   voda

Lid sinds: 02 dec 2005

Laatste bezoek: 16 apr 2024

   Aanbevelingen

Ontvangen: 81424

Gegeven: 20813

   Aantal posts: 363.534
Worley, ABB & IBM to Create an End-to-End Green Hydrogen Solution

Strategic Research Institute
Published on :
01 Mar, 2022, 5:30 am

Worley & IBM have signed a memorandum of understanding to collaborate on helping energy companies build and operate green hydrogen facilities more efficiently and at scale. The planned three-party collaboration aims to develop an integrated, digitally enabled solution for facility owners to build green hydrogen assets more quickly, cheaply, and safely, and operate them more efficiently. The planned relationship is subject to the parties reaching definitive agreements.

Under the collaboration, Worley will provide engineering, procurement, and construction expertise across all stages of the project. ABB will provide offerings for electrical infrastructure, automation, operations digitalization and optimization, and energy management. IBM will provide systems integration services, as well as data framework and management solutions. Together, the three parties will provide operations and maintenance services, leveraging their combined digital expertise.

Green hydrogen is a form of clean energy made from water through electrolysis, which is powered by renewable energy. While many industries want to invest in green hydrogen, high production costs pose a barrier to driving market adoption and achieving scale over natural gas or blue hydrogen. In addition, production facilities require an accessible and abundant renewable energy supply. This collaboration aims to help customers address these challenges by scaling up technologies and reducing production costs to enable green hydrogen to become more widely used.

Bijlage:

0
”
Quote Reageren

Niet oké